DokuWiki Instructions (local)
DokuWiki Manual
Site Checker (Orphans Wanted)
This is an old revision of the document!
Noma Chipper with Tecumseh 5 h.p. gas engine
Looked at engine, it has this stamped on the side: H50-65581U
Trying to replace pull starter. After research (Partstree.com), ordered 590666a, 9/30/2015.
According to a guide, engine model number is one of OVRM50, V50, TVM125, LAV50, VH50, ULT50, VLV50, VLXL50, but the model stamped on the housing doesn't agree.
Tried to use to wash off deck, but one of the two hoses would not fasten to the gun. I had securely clamped on the other one, the high-pressure side, but when turning on the power and the water, and pulling the handle, hardly any water comes out of the high pressure nozzle. Some water comes out of the wash side, but this doesn't change with the power pump on. 7/22/2016 8:30 p.m.
Fixed by disassembling the gun, and noticed that an O-ring was broken, which receives the high-pressure hose. Purchased replacement at Ace Hardware. Now it works, but the plastic clip is partially broken which holds the high-pressure fitting into the gun. Was able to clean the patio though. 7/29/2016.
Cordless, with 40V battery.
| Model | |
|---|---|
| String | I use .080 with a triangular cross-section |
| Last Rewind | 7/29/2016 |
Manual: ry40001_ry40022_725_trilingual_03.pdf
Found at this URL: https://manuals.ttigroupna.com/system/files/8013/original/RY40001_RY40022_725_trilingual_03.pdf?2015
Cordless, with 40V battery. Purchased for $299 from Home Depot.
| Battery | 40V |
|---|---|
| Bar Length | 14“ |
| Model | RY-40503 |
