Having trouble getting consistent Card House behavior. When I make a simple 2-D array of cards, it falls. Trying to find proper settings so that cards will sit properly until impacted.

This setting causes less jitter, and cards don't fall through the base:

Scene -> Rigid Body World -> Steps Per Second = 120

The speed (Scene → Rigid Body World) was at 0.5. When I changed it to 1.0, the cards fall through base. Solver Iterations didn't have effect on card falling behavior

But the cards fall when playing animation (Alt-A).

Trying different “Card” settings to determine best House of Cards settings.

I made a single card, used the array modifier to create 5 vertically, applied modifier, separate pieces by loose parts, Transform → Origin to Geometry, applied physics with left panel “Add Active” - configured according to table above, then clicked all cards, click “Copy From Active”.

Now need to see if this works for smaller cards. One utube author commented that Blender doesn't work as well with smaller objects.

7/21/2016 11:00 a.m.