User Tools

Site Tools


Sidebar

Dan's Wiki

DokuWiki Instructions (local) DokuWiki Manual
Site Checker (Orphans Wanted)

Edit Sidebar

projects:a4sim:throttlequadrant

This is an old revision of the document!


Table of Contents

Throttle Quadrant

Because of the high number of digital inputs, looks like I'll need a Arduino Mega 2560 for this. (Ordered 1/6/2020.) The Mega 2560 has 53 digital I/O pins.

Notes

Zero Throttle outerWhen throttle is at extreme zero (requires moving stick left past stop), connects Cannon r to Canon K (ground).
Jettison ArmIs DPDT. When closed, 1 connects to 3, and 2 connects to 4. Pin 2 is not available at Canon plug, instead, it is connected to Jettison pin 1.
JettisonWhen Jettison Arm is closed, Jettison pin 2, (Canon J) goes to level of Jettison Arm pin 4.

Wiring

Canon
Plug
Pin
ControlLineArduino ConnectionHardware Connector
ASpeed brakeOpen44-D26J1-1
BSpeed brakeCommon44-GndJ1-2
CSpeed brakeclose44-D27J1-3
DRudder trimRight44-D28J1-4
ERudder trimCommon44-GndJ1-5
FRudder trimLeft44-D29J1-6
GHandle Mic CommonCenter44-GndJ1-7
GZero Throttle innerCommon44-GndJ1-7
HFlapsUp44-D32J2-1
JIgnition red244-D34J2-2
KElevator trimCommon44-GndJ2-3
KFlapsCommon44-GndJ2-3
KZero Throttle outer44-GndJ2-3
KIgnition red144-GndJ2-3
L? Unknown light??
MHandle Toggle
momentary and on/off
common44-GndJ4-5
NHandle Mic ICSBlack44-D35J2-4
PHandle Mic UHF244-D36J2-5
R-Light upper right main paneltipNCNC
S-
T-
U-
V-
W-JATO Arm Light1NCNC
XThrottle potRed44-5VJ4-1
Y-
ZJettison Arm444-GndJ3-1
aJettison Arm344-GndJ3-2
b-
c-
d-
eJettison Arm144-D37J3-3
f-
gHandle Toggle
momentary and on/off
center44-D38J4-6
hElevator TrimPull44-D39
iElevator TrimPush44-D40J3-5
jJettison244-D38J3-6
kFlapsdown44-D33J2-6
m-
n-
pThrottle potBlack Wiper44-A0J4-2
qThrottle potWhite44-GndJ4-3
rZero Throttle outerNormally Closed44-D42J4-7
s-Zero Throttle innerNormally Closed--
t-Center
!1Jettison Arm2--
!1Jettison1--
?JATO Arm Light2NCNC
projects/a4sim/throttlequadrant.1578535630.txt.gz · Last modified: 2020/01/09 02:07 by dwheele