Dan's Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== a4simData.json File Format ======

The copy of this file located on Raspberry Pi at ''/home/pi/Documents/app/projects/XplaneA4HardwareSimAgent/a4simData.json'' is considered the official version. This copied occasionally to other places in the form of working copies.

==== Example ====

<code json>
{
  "hardwareAgent": {
    "ip": "192.168.0.8",
    "port": 49200
  },
  "hardwareAgentClient": {
    "ip": "192.168.0.12",
    "port": 49190
  },
  "drefs": [
    {"name": "sim/flightmodel2/misc/AoA_angle_degrees",
      "hide": true,
      "datadirection": "out",
      "type": "float",
      "units": "degrees",
      "notes": "Angle of attack probe. Positive means aircraft nose is above 
        the flight path in aircraft coordinates.",
      "i2c": {
        "address": 42,
        "enabled": false,
        "simvalue": {
          "interpolationDatapoints": [
            0,
            15
          ]
        },
        "hardware": {
          "maptype": "linear",
          "interpolationDatapoints": [
            0,
            270
          ],
          "type": "small unsigned int"
        },
        "notes": "Bit 0: 0=Write, 1=Read",
        "register": "0x00"
      }
    }
</code>

==== General Dref Info ====

^name|Actual X-Plane Dref name|
^hide|If "false" it is as if it is not even here. To skip processing of missing hardware, for example.|
^datadirection|"**in**" = this data flows in to X-Plane (e.g., Aileron input), "**inNonZero**" = flows to X-Plane **only** if not in the zero position (e.g., a trigger for speedbrake retract), "**inNonZeroPerSecond**" = flows to X-Plane **only** if not in the zero position (e.g., a momentary request to move toward a maximum), "out" = this data flows **out** from X-plane (e.g., an airpseed amount)|
^type|Data type of Dref, e.g., "float, int, bool"|
^units|e.g., knots, degrees. Ignored by simulation|
^notes|Reference notes, because JSON doesn't provide comments, put free-form notes here, ignored by simulation|
^i2c|I2C communications parameters and translation values|

==== I2C Block ====
^address|I2C channel, in decimal e.g., 39|
^enabled|If "true" values are processed normally, if "false, the value is not processed, but place for the data in the blocks transmitted/received via I2C remains present. To deactivate the Dref, use "hide" mentioned above.|
^simvalue : interpolationDatapoints|Numeric array of values to be sent to or received by the simulator. Correspond to the values in hardware:interpoliationDatapoints. Need to match the quantity and order.|
^hardware : maptype |One of "linear, "rphtSimpleLEDIndicator", "same" - triggers type of translation|
^hardware : interpolationDatapoints|Numeric array of values to be sent to or received by the hardware device.|
^hardware : type | One of "unsigned byte", "small unsigned int" (2 bytes), "one byte bool" (a byte with value 0 or 1) , "float" - the value to be sent to or received by the hardware device.|
^notes|Comments, ignored by simulation|
^register|I2C register, currently not implemented, ignored by simulation|
Dan's Wiki

User Tools

Site Tools

Page Tools
