This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
projects:unitronfrequencyconvert:start [2019/06/24 03:31] dwheele [Notes] |
projects:unitronfrequencyconvert:start [2019/07/03 23:53] (current) dwheele [Capacitors reinstalled] |
||
|---|---|---|---|
| Line 44: | Line 44: | ||
| * Called 2/5/2019, 9:50 a.m. PT, no answer. | * Called 2/5/2019, 9:50 a.m. PT, no answer. | ||
| * Called 2/6/2019, talking with Barry | * Called 2/6/2019, talking with Barry | ||
| + | |||
| + | ===== Plug ===== | ||
| + | |||
| + | Replaced the plug which connects to the aircraft. The old one had a lot of corrosion, and the sockets look like they were not as tight around the pins as they should be. The new ones are silver plated copper. | ||
| + | |||
| + | The general part number is MS25486, which is a standard. The part number on the original plug is 195-60044-1-30 | ||
| + | |||
| + | Replacement 400 Hz, AC 1/0 GPU Connector Plug, 6-Pole Female, $299.00 (received 6/21/2019). | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| ===== Capacitors ===== | ===== Capacitors ===== | ||
| Line 50: | Line 64: | ||
| There have been problems with the Unitron GPU. When connected to the Challenger 604, and when engaging heavy load (all of the hydraulic pumps), the Challenger disconnects from the power. | There have been problems with the Unitron GPU. When connected to the Challenger 604, and when engaging heavy load (all of the hydraulic pumps), the Challenger disconnects from the power. | ||
| - | After various troubleshooting activities, and after the manufacturer suggested it, I measured the AC Filter capacitors, and it appears that 11 of the 18 are not working. | + | After various troubleshooting activities, and after the manufacturer suggested it, I measured the AC Filter capacitors, and it appears that 11 of the 18 are not working. |
| - | + | ||
| - | Planning to order new ones from the manufacturer, or via 3rd party. | + | |
| 6/23/2019 | 6/23/2019 | ||
| + | Talked to Barry today. He said the part number is 150-18065-1. He said to call back tomorrow X138 and they can sell me the capacitors. He thought they would be less than $15 each. | ||
| + | |||
| + | 6/25/2019 | ||
| + | |||
| + | Ordered 18 capacitors from Unitron today, about $10 each, requesting fastest shipping. | ||
| + | |||
| + | {{: | ||
| + | |||
| + | 6/26/2019 | ||
| + | |||
| + | Capacitors arrived, tested OK, installed in unit today. | ||
| + | |||
| + | 6/27/2019 | ||
| + | |||
| + | {{: | ||
| + | |||
| + | {{: | ||
| + | |||
| + | Following is a diagram, drawn as though viewed from the top, and the bottom of the drawing is closest to the front door. It shows dots (" | ||
| + | |||
| + | {{: | ||
| + | |||
| + | Measured capacitors after removal. As expected, 11 were bad, 7 were good. The 7 good ones I put into the tool cabinet in the hangar. | ||
| + | |||
| + | ==== Capacitors reinstalled ==== | ||
| + | In addition to installing replacement capacitors, I also tightened the push-on connectors for better connections. | ||
| + | {{: | ||
| + | They report that the GPU is not working correctly with the Challenger 604. 7/3/2019. | ||
| + | ==== New Capacitor Closeup ==== | ||
| + | {{: | ||