User Tools

Site Tools


projects:challenger604:boostpumpswitchtroubleshooting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
projects:challenger604:boostpumpswitchtroubleshooting [2022/09/14 01:20]
dwheele [Challenger 605 Fuel Distribution Schematic]
projects:challenger604:boostpumpswitchtroubleshooting [2022/09/14 05:21] (current)
dwheele [Conclusion]
Line 9: Line 9:
   * Don has a spare relay on hand   * Don has a spare relay on hand
   * Replacement pump costs $9000   * Replacement pump costs $9000
-  * Don bought replacement switch 9/11/2022+  * Don bought replacement switch 9/11/2022, to be delivered to Duncan, who will install it. 
 + 
 +===== Conclusion ====== 
 + 
 +We removed the fuel assembly in the cockpit, and measured ohms between pin underscore-C and underscore-D. On the Right Hand Fuel Boost Switch, it measured about 600 ohms and the same spot on the LH switch it measured about 16 ohms. As a comparison, we measured other contacts, such as B to underscore-Z, and it measured 0.5 ohms. 
 + 
 +It appears that indeed the **RH Fuel Boost Switch needs to be replaced, and the LH switch should also be replaced.** This agrees with Don's input that the LH switch did cause one failure, but otherwise the RH switch had the faulty result.
  
  
Line 52: Line 58:
  
 I don't know how hard it is to get to the back of that switch so I can measure.  I don't know how hard it is to get to the back of that switch so I can measure. 
 +
 +------------
 +
 +It turns out that to measure between CC and CNO, it is required to measured at the nearby Canon plug underscore-c to underscore-d.
 +
 +
 ===== Information ====== ===== Information ======
  
Line 58: Line 70:
 ==== Challenger 605 Fuel Distribution Schematic ==== ==== Challenger 605 Fuel Distribution Schematic ====
 {{:projects:challenger604:challenger605fueldistributionschematic.jpg|Challenger 605 Fuel Distribution Schematic}} {{:projects:challenger604:challenger605fueldistributionschematic.jpg|Challenger 605 Fuel Distribution Schematic}}
 +
 +  * 1 - L (R) Collector Tank
 +  * 2 - L (R) Boost Pump / APU Boost Pump
 +  * 3 - L (R) Main Ejector
 +  * 4 - L (R) Scavenge Ejector
 +  * 5 - L (R) Transfer Ejector
 +  * 6 - L (R) Transfer Ejector Float Valve
 +  * 7 - L (R) Engine Fuel SOV
 +  * 8 - L (R) Wash Filter
 +  * 9 - L (R) to Aux X_Flow Valve
 +  * 10 - Gravity Crossflow Valve
 +  * 11 - (not shown)
 +  * 12 - (not shown)
 +  * 13 - APU SOV
 +  * 14 - APU Neg-G SOV
  
   * A - L (R) P Switch = MAIN EJECTOR FAIL (Status MSG)   * A - L (R) P Switch = MAIN EJECTOR FAIL (Status MSG)
Line 68: Line 95:
   * H - Engine-Driven Pump   * H - Engine-Driven Pump
  
-{{ :projects:challenger604:ds6213-standard-eu-en.pdf |Challenger 605 Fuel Diagrams}}+{{ :projects:challenger604:cl605-fuel_system.pdf |Challenger 605 Fuel System Diagrams}}
  
 {{ :projects:challenger604:wm28-21-00-102_001.pdf |Fuel Distribution Electrical Schematic}} {{ :projects:challenger604:wm28-21-00-102_001.pdf |Fuel Distribution Electrical Schematic}}
projects/challenger604/boostpumpswitchtroubleshooting.1663118405.txt.gz · Last modified: 2022/09/14 01:20 by dwheele