Differences

This shows you the differences between two versions of the page.

--- projects:a4sim:maincontrols [2019/08/17 16:35]
dwheele
+++ projects:a4sim:maincontrols [2020/02/22 17:07] (current)
admin ↷ Links adapted because of a move operation
@@ Line 1: / Line 1: @@
 ====== Main Controls (Aileron, Elevator, Rudder) ======
+Also see [[projects:a4sim:stick|Stick]].
 The original simulator has a robust implementation, consisting of heavy-duty bell-cranks, pivot bearings and push-rods. Each is mechanically linked so that it slides one of 3 linear potentiometers. Resistance measures between a minimum of about 600 ohms, to approximately 8K ohms. The aileron potentiometer has some movement limitation, so it might have different measurements.
-{{:projects:a4sim:flightcontrolpotentiometer_size640.jpg?direct&600|One of three flight control potentiometers}}
+{{a4sim:flightcontrolpotentiometer_size640.jpg?direct&200|One of three flight control potentiometers}}
-In the photo, the fingers point to the two active connection points (5 and 6).
+In the photo (click it to enlarge), the fingers point to the two active connection points (5 and 6).

Dan's Wiki