Differences

This shows you the differences between two versions of the page.

--- projects:a4sim:jstpinout [2020/01/18 17:03]
dwheele
+++ projects:a4sim:jstpinout [2021/02/11 22:31] (current)
dwheele [4-Pin JST for connection for Arduino I2C Bus]
@@ Line 3: / Line 3: @@
 I've been using JSTs to connect between components. Here are the pinouts used:
-{{:projects:a4sim:jst_3pinpot.png | }}
+==== 3-Pin JST for Pots ====
   - Ground
   - Analog In
   - 5V
-{{:projects:a4sim:jst_5pin_raspberrytoarduino.png |}}
+{{a4sim:jst_3pinpot.png|3-Pin JST for Pots}}
-  - SCL (I2C Clock)
+==== 4-Pin Male JST for connection for Arduino I2C Bus ====
   - SDA (I2C Data)
+  - 9  - 12V (Vin) (provides power for Arduinos)
   - Ground
-  - 3V (supplies level converter LV for Raspberry Pi)
-  - 5V (provides power for Arduinos)
-{{:projects:a4sim:jst_6pinarduinogeneralpurposei2c.png |}}
   - SCL (I2C Clock)
-  - SDA (I2C Data)
-  - Ground
-  - (N.C., Future)
-  - (N.C., Future - maybe 12V for servos)
-  - 5V (provides power for Arduinos)
-{{:projects:a4sim:bearingindicatorfront.jpg?600 |}}
+{{a4sim:jst_4_pins.png |4-Pin JST for Arduino I2C Bus}}
-test

Dan's Wiki