Differences

This shows you the differences between two versions of the page.

--- projects:a4sim:componentinventory:aoa [2019/08/24 00:58]
admin
+++ projects:a4sim:componentinventory:aoa [2020/02/22 17:07] (current)
admin ↷ Links adapted because of a move operation
@@ Line 6: / Line 6: @@
   * Main dial, scale is 0 to 30 (units, not degrees, per Navy info)
-  * "OFF" indicator
+  * "OFF" indicator. The Off indicator measures about 60 ohms. This can be indicated by apply 5V through a 220 Ohm Resistor. Draws 14 mA
-  * Red light and buzzer, perhaps for stall indication
+  * Red light and buzzer, perhaps for stall indication. This can be indicated by apply 5V directly, draws 0.7 amps.
-The Off indicator measures about 60 ohms. It probably can be driven with very little current with a current-limiting resistor.
-The Red light and buzzer works on 5V, but it draws 0.7 amps.
 http://www.navyair.com/Angle%20of%20Attack%20Indicator.htm
-{{:projects:a4sim:componentinventory:a4_aoa_text.jpg?direct&300|Angle of Attack info from Navy documentation}}
+{{a4sim:componentinventory:a4_aoa_text.jpg?direct&300|Angle of Attack info from Navy documentation}}

Dan's Wiki